VintageKustom.com: Repairing Kustom Amps » Kustom 50-2 Amp Ground Cord

Home » VintageKustom.com » Repairing Kustom Amps » Kustom 50-2 Amp Ground Cord (Grounding Power Cord)

Show: Today's Messages :: Polls :: Message Navigator

Kustom 50-2 Amp Ground Cord [message #28540]

Mon, 18 April 2022 21:49

jammy5152
Messages: 62
Registered: May 2018
Location: Georgia

Member

Hey
I have replace the 2 prong power cord with a 3 prong power cord and noticed a cap that reads 0.22 uF/ 150 VAC
which is soldered to the middle leg of the switch with 1 lead and the other lead is grounded to a screw post on the back of the amp....
I'm using that ground post for my green wire now was wondering is that the " Death Cap" and should it be cut
out of the switch area...??
I have not turned it on yet while waiting for another part ...
This is a Kustom 50-2 amplifier...
Thanks

[Updated on: Mon, 18 April 2022 22:01]

Report message to a moderator

Re: Kustom 50-2 Amp Ground Cord [message #28541 is a reply to message #28540]

Tue, 19 April 2022 06:10

stevem
Messages: 4774
Registered: June 2004
Location: NY

Senior Member

Just cut it out completely.

Is this the amp you need the volume intensity pot for?

[Updated on: Tue, 19 April 2022 06:10]

Report message to a moderator

Re: Kustom 50-2 Amp Ground Cord [message #28542 is a reply to message #28541]

Tue, 19 April 2022 07:22

jammy5152
Messages: 62
Registered: May 2018
Location: Georgia

Member

Yes it is ... It's for the Vib/ Tremelo though...I have a pot coming in which I might be able to remove the shaft to replace in mine...

[Updated on: Tue, 19 April 2022 07:24]

Report message to a moderator

Re: Kustom 50-2 Amp Ground Cord [message #28546 is a reply to message #28540]

Tue, 19 April 2022 10:16

stevem
Messages: 4774
Registered: June 2004
Location: NY

Senior Member

What is bad with your original pot/ swt?

Report message to a moderator

Re: Kustom 50-2 Amp Ground Cord [message #28551 is a reply to message #28546]

Tue, 19 April 2022 20:46

jammy5152
Messages: 62
Registered: May 2018
Location: Georgia

Member

stevem
The shaft is broken on the pot...I took it apart and the shaft is missing completely and the rear of the pot is in broken plastic pieces ...This must have fallen over sometime ago ( I got it from someone) I'm waiting on a pot that looks just like it and will replace the front of the pot with the shaft
Thanks

[Updated on: Wed, 27 April 2022 19:35]

Report message to a moderator

Previous Topic:	K50
Next Topic:	Kustom 50-2 Reverb

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Tue Nov 05 05:40:53 EST 2024