VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » Replcement Ball Casters

Show: Today's Messages :: Polls :: Message Navigator

Replcement Ball Casters [message #29063]

Wed, 26 July 2023 15:47

rodak
Messages: 516
Registered: October 2001
Location: Georgia

Senior Member

One of the casters on my K200 is missing some bearings, and the cabinet tends to swerve pretty bad to one side - really annoying. Perusing old posts here it seems Grainger was the go-to supplier for good ball casters, but at one point I saw it mentioned that they were no longer made, or priced too high. Well, taking the supplied part number (5X758) to grainger.com showed they were indeed discontinued, but they had a link to a replacement:

https://www.grainger.com/product/GRAINGER-APPROVED-Standard- Plate-Caster-2-in-437V29?opr=ILOF

Looks pretty good, and the price is certainly right, almost too good - a buck.43 each? Even with shipping, a set of four will set me back less than 20 bucks.

Anyone see anything wrong with these? The size and weight capacity appear to be the same.

www.combo-organ.com

Report message to a moderator

[Message index]

		Replcement Ball Casters By: rodak on Wed, 26 July 2023 15:47
		Re: Replcement Ball Casters By: stevem on Thu, 27 July 2023 18:19
		Re: Replacement Ball Casters By: rodak on Thu, 27 July 2023 19:50
		Re: Replcement Ball Casters By: rodak on Sat, 29 July 2023 20:21
		Re: Replcement Ball Casters By: stevem on Sun, 30 July 2023 09:07
		Re: Replcement Ball Casters By: rodak on Mon, 31 July 2023 09:35
		Re: Replcement Ball Casters By: KustomBlues on Fri, 25 October 2024 09:51

Previous Topic:	Replacement Pilot Bulb for Kustom 200
Next Topic:	Standel S115 speakers in a 215 Kustom cab...?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sat Nov 16 23:42:46 EST 2024