VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Comment Board » 1G+1H cab crossover cap (need input)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
1G+1H cab crossover cap [message #17777] Fri, 30 November 2012 00:53 Go to previous message
kustomhead is currently offline  kustomhead
Messages: 121
Registered: April 2012
Location: Redding, Ca
Senior Member
I want to get less treble from my 1G+1H cab which has the 15" speaker plus horn. There's a wire from the + on the horn to another terminal on the horn that has FR Belden and what looks to be a written Ten on the wire. Is this a 10uf capacitor wire that I would replace with a 4uf cap to bring the speaker up front? I don't know much about this and would appreciate input.

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message icon14.gif
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Good news - bad news !
Next Topic: K200-B5 Specs and Forum Selling Tips
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Mon Oct 14 10:00:24 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software