VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Comment Board » empty bass cabinet -Krossroad AR200 210H
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
empty bass cabinet -Krossroad AR200 210H [message #7944] Mon, 25 December 2006 13:27 Go to previous message
LesS is currently offline  LesS
Messages: 478
Registered: December 2002
Senior Member
Can you be a Kustom nut and only own one Kustom?
Well it doesn’t matter because now I have two (sort of).
I just got an empty Krossroad 2x10 bass cabinet in silver.
Cabinet was never used – amp or back never installed- the only hardware that it has are the factory grill and spring handles.
So I have to get speakers, back, port tube, and casters for it.
I’m not going to install a tweeter at first as the speakers that I am getting have good high end and I use a separate midrange driver with all my cabinets anyway.
I will leave the amp space empty too as I will be using this as a speaker cabinet.

Cabinet is all plywood and is very heavily braced –it has a lot of internal bracing for such a small cabinet.
Internal speaker enclosure volume is 2.27 cubic feet – on the small side for a 2x10
(Avatar 2x10 is 3.39 CF, EV B210 is 3.07 CF, Hartke 2x10TP is 1.6 CF)

I’m putting in Eminence S2010 BassLites – see separate posting under "Replacement Part Suggestions".
-Les S
VintageKustomFAQ16

[Updated on: Sun, 09 September 2007 22:04]

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Vibe Controls SC-150
Next Topic: Kustom 2x15 cabinet - Altec 421a
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sun Nov 17 06:56:09 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software