| K150 K250 K300 K600 Switch Replacement [message #20295] |
Sun, 09 March 2014 08:08  |
C4ster
Messages: 686
Registered: June 2001
Location: Mukwonago, WI (Milwaukee...
|
Senior Member |
|
|
Hi guys, It's been a long time since I've commented here but I also have acquired a K300 PA with missing switches. After reading about this, I found this link. I am not in a position to measure the dimensions of the original Licon switch, but this might be a suitable replacement. http://www.e-switch.com/product/tabid/96/productid/51/sename /d16-series-illuminated-pushbutton-switches/default.aspx#ex1
See what you think. Kind of like the old purple Kustom (Dialight) lights in the older series, you can get the switches with different lens colors, if you so desire. There is a PDF specification that you can download and it is very detailed with every option you can imagine. I think this would be a great replacement.
Conrad
|
|
|
|
|
|
| Re: K150 K250 K300 K600 Switch Replacement [message #20297 is a reply to message #20296] |
Sun, 09 March 2014 09:10  |
C4ster
Messages: 686
Registered: June 2001
Location: Mukwonago, WI (Milwaukee...
|
Senior Member |
|
|
Steve,
The bezel is 18mm (0.709") square and the hole size is 16mm (0.630). The body of the switch is threaded and a knurled collar screws onto the body to secure the switch in the hole. At the 8 amp rating I think the DPDT would work in both switch positions, if you wished to continue using the ground polarity switch. If you decided to ground the amp, recommended of course, you could just use a similar lighted pilot light to fill the hole and look cool. I think I would use a SPDT switch for power and a light in the other hole for effect.
Conrad
|
|
|
|
VintageKustom.com
Search
Help
Members
Register
Login
Home
]