VintageKustom.com: Repairing Kustom Amps » K-200B-2 normal channel

Home » VintageKustom.com » Repairing Kustom Amps » K-200B-2 normal channel

Show: Today's Messages :: Polls :: Message Navigator

Re: K-200B-2 normal channel [message #25330 is a reply to message #25325]

Fri, 29 July 2016 08:47

slk854
Messages: 192
Registered: January 2015

Senior Member

I just re read my post and I know it doesn't make a lot of sense. The bright side is working. The one with the reverb and vibrato. The normal side is not. It does not matter if you plug into the low or high jack. It does make a little scratchy noise if I turn the volume knob back and forth, but no input sound from a guitar. It will make the same noise when nothing is plugged into the jack. Need advice...

Steve

Report message to a moderator

[Message index]

		K-200B-2 normal channel By: slk854 on Thu, 28 July 2016 15:57
		Re: K-200B-2 normal channel By: slk854 on Fri, 29 July 2016 08:47
		Re: K-200B-2 normal channel By: stevem on Fri, 29 July 2016 08:57
		Re: K-200B-2 normal channel By: slk854 on Fri, 29 July 2016 09:18
		Re: K-200B-2 normal channel By: stevem on Fri, 29 July 2016 09:52
		Re: K-200B-2 normal channel By: chicagobill on Fri, 29 July 2016 13:05
		Re: K-200B-2 normal channel By: slk854 on Fri, 29 July 2016 17:24
		Re: K-200B-2 normal channel By: stevem on Sat, 30 July 2016 06:29
		Re: K-200B-2 normal channel By: slk854 on Wed, 03 August 2016 14:44
		Re: K-200B-2 normal channel By: chicagobill on Wed, 03 August 2016 15:39
		Re: K-200B-2 normal channel By: slk854 on Wed, 03 August 2016 15:58
		Re: K-200B-2 normal channel By: stevem on Thu, 04 August 2016 06:04
		Re: K-200B-2 normal channel By: slk854 on Thu, 04 August 2016 08:08

Previous Topic:	How can I stop reverb howling on K 100?
Next Topic:	Quad 100 DFXWT "special edition" - repairs

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Thu Aug 08 19:55:24 EDT 2024