VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Comment Board » tell me about reverb tank tones (got rid of feedback; got more treble)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: tell me about reverb tank tones [message #25086 is a reply to message #25085] Fri, 17 June 2016 03:03 Go to previous messageGo to previous message
chicagobill
Messages: 2005
Registered: April 2003
Senior Member
Even though two vintage tanks are the same number, they may have led completely different lives. The springs are a mechanical device. If one tank was bounced a lot like in a touring band's van and the other tank sat in one place for most of its' life, the springs may have stretched on one tank while they remain in almost original condition in the other tank.

There are foam pads at the ends of the springs that can be a problem again, depending upon how the tank was stored. If one tank sat in a cool basement and the other tank was stored in a hot attic the foam ends would deteriorate at different rates, causing one tank to feedback easier than the other.

I agree that the new tanks are voiced differently than the old ones were. My old ears prefer the sound of the old tanks, because that is what I know. A lot of younger guys like the deeper, fuller sound of the new tanks because they didn't grow up listening to the sound of the original tanks. If I was looking to build a reverb unit that was to be used for a recording studio or a stereo system, I'd like the fuller sound better too. I just like the brighter, simpler sound of the old tanks for guitar amps.

There was a fella here that had an old tank rebuilt by the guy at the old Accutronics factory, using NOS parts. I seem to recall that he was pleased with the results. Maybe you can search the board and find the thread that we discussed this stuff in.

[Updated on: Fri, 17 June 2016 03:04]

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom Overload
Next Topic: tell me about design & tones
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Mon Jul 01 07:37:23 EDT 2024