VintageKustom.com: Wanted » cabinet handle

Home » Classified Ads » Wanted » cabinet handle (looking for a cabinet handle K 200 2 2x12 cab )

Show: Today's Messages :: Polls :: Message Navigator

cabinet handle [message #25102]

Tue, 21 June 2016 16:24

mjg3145
Messages: 16
Registered: June 2016

Junior Member

one of my handles on the 2x12 cab is missing the black plastic part. If someone has one let me know
Mike

Report message to a moderator

Re: cabinet handle [message #25106 is a reply to message #25102]

Thu, 23 June 2016 00:05

Iowa Boy
Messages: 767
Registered: June 2014

Senior Member

If you look on ebay under Kustom then go to musical instruments you will see that someone has handles....new for sale $21.50 plus shipping. This is the complete handle. I ordered 4 so there is 6 still left at the time of this posting.

Report message to a moderator

Re: cabinet handle [message #25108 is a reply to message #25106]

Thu, 23 June 2016 07:33

pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi

Senior Member

The handles on ebay are for the newer Kustom Coupe 36-72 amps. These handles are wider than the original kustom handles from the 60's. The original handles, the inner most holes on hinges measure 3 7/16 inches apart. The newer handles, the seller states the inner most holes on hinges measure 4 inches apart.
pleat

Report message to a moderator

Re: cabinet handle [message #25109 is a reply to message #25108]

Thu, 23 June 2016 10:37

Iowa Boy
Messages: 767
Registered: June 2014

Senior Member

Well that bites........good thing I'm recovering two of those cabinets anyway. That's what I get for not consulting the master first. Thanks Pleat. @#%!* Smile

Report message to a moderator

Re: cabinet handle [message #25110 is a reply to message #25109]

Thu, 23 June 2016 11:08

mjg3145
Messages: 16
Registered: June 2016

Junior Member

Thanks I saw that cabinet handle for $21.50 as well. Since my rig is a late 60's The one on E bay may not have fit correctly. I was going to measure the screw holes on mine, but I bet they will be less than 4 inches apart as you stated.

Mike

Report message to a moderator

Re: cabinet handle [message #25113 is a reply to message #25110]

Thu, 23 June 2016 16:59

kustomoholic
Messages: 227
Registered: March 2009
Location: Tulsa,oklahoma

Senior Member

There was a supplier in Wisconsin that modified those handles to fit the original hole pattern..... no longer available today but the basic mod is a bit of bending the handle frames to move the holes into a usable size. I have 2 pair of these on some black Pa 4-12 cabs. Worked fine for me.

Report message to a moderator

Previous Topic:	420 Speaker baffle with Chrome tubes on grill
Next Topic:	Kustom K200A-4

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Thu Nov 14 00:51:22 EST 2024