VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » K200 B1 popping fuses
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: K200 B1 popping fuses [message #28218 is a reply to message #28204] Sat, 08 May 2021 18:23 Go to previous messageGo to previous message
DocWaxham is currently offline  DocWaxham
Messages: 46
Registered: October 2018
Member
I have a variac. Its probably going to slow down till I get all my parts. On another subject I have another K200 that I am working on. Someone did a botch job on a 3 prong install. Anyway went to fire this up this p.m. thru my variac. And nothing. I re did the 3 prong install. When I was writing it up there was a jumper between center prong on the top of switch to the bottom prong of the switch. I unsoldered it and went along. Fast forward. Hooked up every thing started to bring up voltage. No pilot light. Checked all again. Nothing. Then I thought that jumper was getting power thru that. Checked voltage. Sure enough that is it. I am guessing the switch is bad. That's all some people.

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Power caps
Next Topic: Repairing Kustom 1-B
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Fri Jun 28 15:11:01 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software