VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Kustom Bass III Channel 1 Hiss (extreme amount of hiss on channel 1 board (PC5127))
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Kustom Bass III Channel 1 Hiss [message #28699 is a reply to message #28698] Sun, 24 July 2022 06:16 Go to previous messageGo to previous message
stevem is currently offline  stevem
Messages: 4752
Registered: June 2004
Location: NY
Senior Member
Well at any rate, and like I posted I really think your down to either scoping thru the gain stages section by section or listening in on them to narrow things down and then review the parts in that section.

I have found at times that it's better and safer to take the time to solder in test points so your not always flipping the board around.
Maybe Bill will add his comments to this to give some guidance?

[Updated on: Sun, 24 July 2022 06:17]

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom IV Bass Power Supply Caps
Next Topic: K200 Bright Channel is ALIVE...
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Fri Jul 12 16:17:45 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software