VintageKustom.com: Comment Board

Home » VintageKustom.com » Comment Board » K-250 Fuzz (K-250 Fuzz behaviors)

Show: Today's Messages :: Polls :: Message Navigator

K-250 Fuzz [message #28081]

Fri, 05 March 2021 11:33

genebradley
Messages: 6
Registered: March 2021

Junior Member

HI All,

been a kustom user since 1971 and a I have some k250-4 heads, never had, seen a new one. My question is should you get a volume boost when enabling the Fuzz. On my heads, the volume goes down.

thanks in advance....

My Fuzz question needs to be further defined. The K-4's have two controls for the FUZZ, Effect and Level. Effect I think is the amount of fuzz mixed into the signal, The Level I am not sure of. Most fuzz or distortion boxes once you get past 50% or so, you hear a perceived and sometimes real boost in volume. How is this one supposed to work, typically on mine, the Level needs to be at 100% and I get a volume drop from when the fuzz is disabled. Is this the way it works or should there be a volume increase past some point. If that's the way it works no volume increase has anybody in the group modified the circuit to perform a volume boost?

[Updated on: Wed, 14 April 2021 20:39]

Report message to a moderator

Previous Topic:	Kustom PA 3000
Next Topic:	K100, Challenger or Commander Combo?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Wed Dec 25 07:39:00 EST 2024