VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Help with T&R HEAD (Please help me troubleshoot my amp)

Show: Today's Messages :: Polls :: Message Navigator

Help with T&R HEAD [message #24911]

Sun, 17 April 2016 12:44

bproctor
Messages: 11
Registered: December 2015
Location: BOSTON

Junior Member

Hello,
I am hoping for some help in diagnosing issues with my vintage blue tuck and roll head.
I believe this is an early head, which has a bright switch, and separate inputs for low and high.
The model number is 3-15J-1 and is marked 'Kustom by Ross, inc.'

For starters,
When i plug into the low inputs, I get a machine / hum modulation. This is with no sound coming through the quarter inch jack into the unit. It sounds a bit like an engine idle.

Any feedback on where i should start troubleshooting the amp would be appreciated.
I did switch over to a grounded cord and replaced the death cap.

Thanks,
Brian

Report message to a moderator

[Message index]

		Help with T&R HEAD By: bproctor on Sun, 17 April 2016 12:44
		Re: Help with T&R HEAD By: bproctor on Sun, 17 April 2016 12:55
		Re: Help with T&R HEAD By: pleat on Sun, 17 April 2016 13:16
		Re: Help with T&R HEAD By: bproctor on Sun, 17 April 2016 13:55
		Re: Help with T&R HEAD By: pleat on Sun, 17 April 2016 20:45
		Re: Help with T&R HEAD By: stevem on Mon, 18 April 2016 06:26
		Re: Help with T&R HEAD By: stevem on Tue, 19 April 2016 14:40

Previous Topic:	To ground or not to ground?
Next Topic:	Kasino U200

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Mon Nov 04 23:37:47 EST 2024