VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Replacement Part Suggestions » How to connect a Snake Eyes head to a K200 8x10 cab (Cable inquiry)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
icon5.gif  How to connect a Snake Eyes head to a K200 8x10 cab [message #18882] Thu, 20 June 2013 10:13 Go to previous message
BucketOfRage is currently offline  BucketOfRage
Messages: 5
Registered: June 2013
Location: Connecticut
Junior Member
Hello! I recently purchased a Kasino 200 8x10 bass combo. I really don't like the tone that's coming out of it so I'd like to use my Kasino Snake Eyes head instead of the amp in the combo.

There is one 1/4" wire coming out of the speaker enclosure that plugs into the amp in the back. I need an extension (1/4" female to 1/4" male) cable because the cable coming out of the speaker enclosure isn't long enough to reach the Snake Eyes.

Is there a specific cable that I need to look for, or anything that I need to avoid? I'm no genius in this field and I really don't want to mess anything up.

Thank you in advance for your advice!

Report message to a moderator

[Message index]
 
Read Message icon5.gif
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Eminence speaker ID????
Next Topic: Speaker for K100 Bass Amp
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sun Jul 21 13:34:58 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software