VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Comment Board » New to the board and to the tuck and roll. (Few noobish Q's)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: New to the board and to the tuck and roll. [message #23792 is a reply to message #23786] Wed, 09 September 2015 20:42 Go to previous messageGo to previous message
Iowa Boy is currently offline  Iowa Boy
Messages: 767
Registered: June 2014
Senior Member
Have you opened the amp to see if the reverb pan is even there or if the cables are connected to it or just laying inside the unit? Check also to make sure that the tip on the footswitch is actually touching the prong on the jack....on one of my amps, did the same thing you described until I cleaned the jack up and bent the prong to where it was suppose to be.
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: KEI 15in Speakers
Next Topic: Coming Clean
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Thu Jul 18 02:16:53 EDT 2024