VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » Classified Ads » Wanted » Needed - factory jack plate
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Needed - factory jack plate [message #14424] Sat, 25 September 2010 15:01 Go to next message
braud357 is currently offline  braud357
Messages: 154
Registered: July 2010
Location: Louisiana
Senior Member
My recently acquired 3-12 cabinet is missing the factory jack plate. Someone mounted a metal plate inside the back panel, so the (4) factory screw holes are still there. Would anyone of you happen to have one laying around, or could you suggest a substitute ? Speaker designation in not important, because I intend to replace the factory Jensen's anyway. THANKS !PB

Report message to a moderator

Re: Needed - factory jack plate [message #14475 is a reply to message #14424] Thu, 30 September 2010 10:43 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4774
Registered: June 2004
Location: NY
Senior Member
I have one somewhere that is labled for CTS drivers.
I will dig it up over the weekend.

Report message to a moderator

Re: Needed - factory jack plate [message #14477 is a reply to message #14475] Thu, 30 September 2010 13:43 Go to previous messageGo to next message
braud357 is currently offline  braud357
Messages: 154
Registered: July 2010
Location: Louisiana
Senior Member
Thank you Steve ! Please let me know if you find it, and let me know how much you want for it. I will be out of town until Sunday night, so I will check back then. Much appreciated !

Report message to a moderator

Re: Needed - factory jack plate-PLEASE DELETE ! [message #14508 is a reply to message #14424] Tue, 05 October 2010 06:01 Go to previous message
braud357 is currently offline  braud357
Messages: 154
Registered: July 2010
Location: Louisiana
Senior Member
Steve, I found some plastic, and fabricated my own plate, so I am no longer in need - THANKS !

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: black Kustom K-200 with 2x15 cab wanted
Next Topic: Looking for 4-D 140
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Mon Nov 04 07:26:52 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software