VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » cheap casters (I found a company that sells the caster really cheap)

Show: Today's Messages :: Polls :: Message Navigator

cheap casters [message #27945]

Sun, 27 December 2020 22:27

RPatt
Messages: 7
Registered: December 2020

Junior Member

Just wanted pass this information along. I guess since I'm retired, I have the time to look for the best deals on things. If you go to the following website, you'll find the casters going for around $21.96 for four of them: shop:servicecaster.com

Service Caster Corporation
Riverfront Business Center
9 South First Avenue
West Reading, PA 19611

Report message to a moderator

Re: cheap casters [message #27946 is a reply to message #27945]

Mon, 28 December 2020 05:51

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

I have found these also and as it turns out they are the same ones Peavey use to sell until some 6 years ago or so it would seem.

The only thing about these casters if are the same as the Peavey ones is that the mounting plate is a smaller square plate then the original Kustom ones.

There's two things you can do about that issue, 1) you can make a new Aluminum mounting bar and mount them as Kustom did with counter sunk machine screws , or 2) you drill new clearance holes in the aluminum bar for wood screws and go thru the bar and into the 3/4" plywood of the bottom of the cabinet.

By the way, once you make 5 postings on this site I will not have to approve them and they will go right up, pictures however can not be posted here at all by members.

[Updated on: Mon, 28 December 2020 05:54]

Report message to a moderator

Previous Topic:	KB150-1 T'n'R Sleeve/Case
Next Topic:	Kustom 150 Reverb Tank Needed

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sat Nov 16 00:35:06 EST 2024