VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » '69-'70 Kustom 100 2 power cord upgrade (power cord upgrade queation)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: '69-'70 Kustom 100 2 power cord upgrade [message #29197 is a reply to message #29196] Mon, 04 December 2023 13:30 Go to previous messageGo to previous message
backlineguy is currently offline  backlineguy
Messages: 21
Registered: November 2023
Junior Member
Thanks Chicago...the model of the tank I have is 3FB1C1D...what's " jumper the ground at the input jack to the chassis ground of the case"? The existing tank has a ground wire soldered to the side of the tank near the Input jack, and it's grounded to a cross brace of the chassis...

...and as much as I appreciate your help, most of what you typed was over my head. I'm not an amp tech, I'm replacing the old 2-prong power cord myself to try and save a few bucks, which I have. The reverb tank is not critical, but if it could work, that would help if I ever decided to sell it...I don't need it now, but I'd like to figure out how to get the new tank to work. Thanks again.

And steve, I'll have to get some 2A fuses...
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Repairing a Kustom TBR400
Next Topic: Information on Voicing Control
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sat Nov 16 14:32:43 EST 2024