VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » K150 Wattage-Volts (Transformer)

Show: Today's Messages :: Polls :: Message Navigator

K150 Wattage-Volts [message #26471]

Tue, 16 January 2018 20:55

CCRBergese
Messages: 22
Registered: April 2011
Location: Argentina

Junior Member

Hello there! I am an owner of a beautiful K150 combo.
I live in Argentina and here electricity is 220volts.
I have to buy a transformer to 110 volts. Now, the question is: output of the combo??? Ampers of the transformator??? Wattage of the transformator???

Thanks!!!

Report message to a moderator

Re: K150 Wattage-Volts [message #26472 is a reply to message #26471]

Wed, 17 January 2018 06:17

stevem
Messages: 4773
Registered: June 2004
Location: NY

Senior Member

These amps have a 3 amp fuse and back then in 1971 the schematic called for 115 volts from the wall outlet.

This means that the amp will be pulling 345 watts @ 115 vac when it's fuse blows.

What you need is a step down transformer that can provide 345 watts or even a little bit more as it will not cause any harm, be allow the step down Transformer to run cooler and last longer.

I would suggest something rated for between 550 and 600 VA like a Triad model N -7MG.

[Updated on: Wed, 17 January 2018 07:27]

Report message to a moderator

Previous Topic:	K150-8
Next Topic:	Cracked A-4 Plexi

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sun Nov 03 17:12:28 EST 2024