VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » Kustom III lead pc board 5065 rev2 (mystery resistor)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Kustom III lead pc board 5065 rev2 [message #27347] Wed, 05 June 2019 10:19 Go to previous message
podbaydoors is currently offline  podbaydoors
Messages: 7
Registered: June 2019
Junior Member
Hi all,

Just signed up for the forum.
I realize that this forum is primarily Tuck 'n Roll ( I used to have a Tuck 'n Roll head, last I heard it was in Vancouver ) but my question today for those wiser than me regards a Kustom III Lead.
It is all original, and still working after a fashion.
All the electrolytic caps will be replaced which should help to preserve it's operating status for a good many more years.
The question I have regards one resistor on the PC 5065 rev 2 board.
The second from the right 1/4 watt brown bodied resistor that obviously was overheated.
Does anyone have the schematic / layout info on this board in this revision?
Can anyone tell me what the value of this resistor is supposed to be?

Best regards,

Lou

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom 100 blowing fuse
Next Topic: Troubleshooting a 250 model 1 Bass amp
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sat Nov 02 18:41:44 EDT 2024