VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » Kustom 300 PA

Show: Today's Messages :: Polls :: Message Navigator

Kustom 300 PA [message #2775]

Fri, 30 May 2003 23:13

Anonymous

I have basically two questions. Does anyone have a schematic for 300 PA? Also, any suggestions on if and where I can have one of the speakers reconed from a 302 column. It's a 12" I believe cts. Are replacement parts avaliable? The part # on the Magnet is 038 5006 00, but the cone has 137-0002-00 on it. I inherited this from my father, and we've used it for our vocals for 5 years now. The head's starting to get a little noisey, and I had to temporarily replace one speaker until (if) I can get this one repaired. I love this thing, I'd rather keep on using it. Thanks.

Report message to a moderator

Re: Kustom 300 PA [message #2777 is a reply to message #2775]

Sat, 31 May 2003 12:16

Bill
Messages: 64
Registered: March 2002
Location: Kansas

Member

I had mine reconed by Kansas Sound. Kansas Sound 4840 North Glendale Bel Aire, KS 67220 316-744-6058 but any speaker recone tech can do it for you. There are several on the internet, Here is a link to several over the nation... http://www.recone.com/ Thrill Bill

Report message to a moderator

Re: Kustom 300 PA [message #2783 is a reply to message #2775]

Tue, 03 June 2003 15:55

stevem
Messages: 4746
Registered: June 2004
Location: NY

Senior Member

Hi, the 137 is the CTS manufacturer code, 220 would be jensen. It can be reconed, but if ti has a aluminum dust cover over the voice coil, the reconer may only be able to provide a regular cover.If you do a search for speaker reconers, you will get a whole list of them. I would recommend WEBER/VST.I will do another post wensday with a address for a guy who has schematics.

Report message to a moderator

Re: Kustom 300 PA [message #2787 is a reply to message #2775]

Wed, 04 June 2003 10:12

stevem
Messages: 4746
Registered: June 2004
Location: NY

Senior Member

Hello again. To get schematics, write to ( bob monday)231 w. northbend rd, cincinnatti, OH, 45216.Kustom boards have PC numbers printed on them, you will have to tell him what numbers you want and if you want the power supply layout which has no PC number.He gets three dollars per schematic, which includes shipping.

Report message to a moderator

Previous Topic:	200 PA
Next Topic:	distortion on k200

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Jun 21 20:27:47 EDT 2024