VintageKustom.com: Comment Board » K-25/K-50 amp impedance

Home » VintageKustom.com » Comment Board » K-25/K-50 amp impedance

Show: Today's Messages :: Polls :: Message Navigator

K-25/K-50 amp impedance [message #4193]

Thu, 13 May 2004 18:22

LesS
Messages: 477
Registered: December 2002

Senior Member

Were the K-25 and K-50 amps made to run at 8 ohms? or was it 16 ohms? (I know they came with a 16 ohm speaker.) -LesS

Report message to a moderator

Re: K-25/K-50 amp impedance [message #4357 is a reply to message #4193]

Mon, 14 June 2004 22:34

KustomBlues
Messages: 490
Registered: June 2001
Location: Michigan

Senior Member

They did come with a 16 ohm Jensen c12-N standard. I would say that if Bud put a 16 ohm speaker in there, then it must be for a good reason. I have played through both with an 8 ohm speaker and they sound like they are working a bit harder than with a 16 ohm, more noiser THD... I think it may be the wise thing to stay with a 16 ohm, but that's just my advice. Rolling Eyes

Report message to a moderator

Previous Topic:	WTB--knobs for K200
Next Topic:	Knobs..

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Mon Aug 05 18:04:38 EDT 2024