VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » Ports available?

Show: Today's Messages :: Polls :: Message Navigator

Ports available? [message #28825]

Sun, 30 October 2022 21:06

rodak
Messages: 516
Registered: October 2001
Location: Georgia

Senior Member

I've been thinking of getting a 2x15 cab for bass, and one came up on Craigslist for $100 with CTS speakers - but it has no chrome or aluminum port tubes, just the holes in the grillcloth. Are those things (or suitable substitute) available anywhere?

www.combo-organ.com

Report message to a moderator

Re: Ports available? [message #28826 is a reply to message #28825]

Sun, 30 October 2022 23:56

pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi

Senior Member

You might want to count the T&R across the top of the cabinet. 11 T&R would be a Frankie cab. 12 T&R would indicate the K200A series cab which came with optional Aluminum port tubes or the less expensive cab with port holes cut in the baffle board. Kustom first did an upcharge of 20.00 per cab and soon they dropped the upcharge and all later cabs came with port tubes.

I don't know where you would find the port tubes. I've seen a few come up for sale on EBay in the past.

pleat

Report message to a moderator

Re: Ports available? [message #28827 is a reply to message #28825]

Mon, 31 October 2022 08:06

rodak
Messages: 516
Registered: October 2001
Location: Georgia

Senior Member

It's a 12-pleat cabinet. And it's not just the kind with holes you can see behind the grillcloth, this one actually had the port tubes, and someone removed them. Looks terrible. Good price, but I just don't think could stomach looking at it all the time. What a shame.

www.combo-organ.com

Report message to a moderator

Re: Ports available? [message #28829 is a reply to message #28827]

Mon, 31 October 2022 11:35

rodak
Messages: 516
Registered: October 2001
Location: Georgia

Senior Member

I see you can get plastic port tubes that look very similar - several of them at partsexpress, but nothing that looks like the correct size. I think if I could get a couple of those and spray the outside ring so it at least looks like the aluminum tubes, that would be sufficient. Just need to find some in the correct size.

www.combo-organ.com

Report message to a moderator

Re: Ports available? [message #28830 is a reply to message #28825]

Mon, 31 October 2022 19:35

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

I the auto restoration field there are services that can re- chrome plastic.
There are also pretty good chrome spray paints that will do the same and last a good long time if you then spray on a clear epoxy top coat.

Report message to a moderator

Re: Ports available? [message #28831 is a reply to message #28825]

Mon, 31 October 2022 21:09

rodak
Messages: 516
Registered: October 2001
Location: Georgia

Senior Member

Thanks, Steve. The Craigslist listing has disappeared, so it's a moot point now, but good to keep in mind if I were to run into another deal like that. I also searched for port tubes and found a bunch of sources on the internet that sell them, but nothing in the correct size.

www.combo-organ.com

Report message to a moderator

Previous Topic:	Last call for replacement knobs
Next Topic:	K200-B1 boards on ebay

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Sat Nov 09 09:28:04 EST 2024