VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » Classified Ads » Wanted » WANTED: 8 inch, 16 ohm CTS (My speaker broke....)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
WANTED: 8 inch, 16 ohm CTS [message #28093] Tue, 09 March 2021 13:01 Go to next message
RevDoc is currently offline  RevDoc
Messages: 7
Registered: August 2016
Location: Eastern Tennessee
Junior Member
I'm looking for an 8 inch, 16 ohm CTS speaker to replace the one
in a 1971 PA column with an adhesive failure. Magnet fell right off the basket.
Anyone have a spare they would part with?
Perhaps I should invoke that lifetime warranty, it's only been 50 years.

Report message to a moderator

Re: WANTED: 8 inch, 16 ohm CTS [message #28137 is a reply to message #28093] Wed, 24 March 2021 05:45 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4773
Registered: June 2004
Location: NY
Senior Member
I would email Weber speakers and ask them what brand 8" driver they could recone with a 16 ohm voice coil and then grab one off of EBay and send it out to Weber.

There's plenty to pick from on there!

[Updated on: Wed, 24 March 2021 05:47]

Report message to a moderator

Re: WANTED: 8 inch, 16 ohm CTS [message #28233 is a reply to message #28137] Mon, 31 May 2021 16:55 Go to previous message
RevDoc is currently offline  RevDoc
Messages: 7
Registered: August 2016
Location: Eastern Tennessee
Junior Member
An excellent suggestion, thanks!
I did manage to find a suitable replacement in storage, one I'd pulled from
an old Leslie rotor assembly.
Just missing the shiny dust cover, but that's an easy fix.

I found a similar cab locally, which advertised as a 4-8 but turned out to be a 4-10
with vintage CTS from 68' and 72' (Kustom by Ross badge) Picked it up cheap as the seller had no idea what it was for.
"what do you do with that? put it in your truck?" He asked.

Replaced the grill and handles, working on small repairs to the vinyl thanks to all the great posts and links on this site, and now I have an awesome
guitar column I didn't even know I needed.

And the sound from those vintage CTS 10s is quite sweet.

Love this site...

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Kustom 50-2
Next Topic: Need a pre-amp PCB
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Thu Oct 31 22:48:23 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software