VintageKustom.com: Wanted » Need Back Panel For K 150-7

Home » Classified Ads » Wanted » Need Back Panel For K 150-7 (anybody got one?)

Show: Today's Messages :: Polls :: Message Navigator

Need Back Panel For K 150-7 [message #13996]

Fri, 02 July 2010 15:04

willc68
Messages: 15
Registered: May 2010
Location: philly

Junior Member

Just got a K 150-7 and it is missing the back panel covering the speakers. Black is preferable but any color would do. Thanks, Will

Report message to a moderator

Re: Need Back Panel For K 150-7 [message #13997 is a reply to message #13996]

Fri, 02 July 2010 22:57

pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi

Senior Member

Will, I've made my own. 3/4" plywood and Joann's fabric store has a black nauahyde that is a really close match to the original. I use it a lot on amps and speaker cabinet where the lower portion of the covering is ripped up or torn. I'm sure there will be a store near where you live. Finding the vent plates is the hard part.
Don

Report message to a moderator

Re: Need Back Panel For K 150-7 [message #13998 is a reply to message #13997]

Sat, 03 July 2010 11:53

willc68
Messages: 15
Registered: May 2010
Location: philly

Junior Member

Thanks for the info Don. I may very well go that route and build one myself. I was just hoping someone may have one lying around, cause all the missing ones have to end up somewhere, right? I have never covered anything in naugahyde but I guess this hot weather should make it a bit easier for the stretching and stapling. And yes I am sure the vent covers would be hard to find so I may initially just do closed back and if i dont like the sound I will break out the jigsaw and figure a way to fabricate some vent covers. - Will

Report message to a moderator

Re: Need Back Panel For K 150-7 [message #13999 is a reply to message #13998]

Sat, 03 July 2010 12:44

pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi

Senior Member

JC is one of the collectors that hang on this site. He replaced some missing 3" port holes with some 3" dia. round plastic plugs that he found maybe at home depot, they are used in finishing trim rings for computer desks. JC can help us in what he found, and where he got them. I saw the amp when he was finished and it looked great.
The material I've used from that fabric place, is very stretchable and is easy to work with.

Don

Report message to a moderator

Previous Topic:	The Kustom want list PS: ill be at the Kustom Get together!
Next Topic:	Cabinet Wanted

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Thu Nov 07 07:28:17 EST 2024