VintageKustom.com: Replacement Part Suggestions » Power amp Transistor replacement

Home » VintageKustom.com » Replacement Part Suggestions » Power amp Transistor replacement

Show: Today's Messages :: Polls :: Message Navigator

Power amp Transistor replacement [message #23823]

Sat, 12 September 2015 10:17

Mrd34d
Messages: 9
Registered: September 2015

Junior Member

I've got all of the other parts for my Kustom Sidewinder ordered, but I'm having a hard time finding this power amp transistor.

Q5 - Kustom part no. 007-0012-00

So far I've have found that it's transistor 38737-40410 nte129 pnp driver

But anything I've come across looks nothing like it (it's the green one). Any ideas?

Report message to a moderator

Re: Power amp Transistor replacement [message #23826 is a reply to message #23823]

Sat, 12 September 2015 12:13

chicagobill
Messages: 2006
Registered: April 2003

Senior Member

I don't know what you mean by the green one. The original transistor was an RCA 40410 which is a TO-39 metal case transistor that was welded to a heat sink.

Later versions of these amps used a RCA TO-220 with a plastic body that was riveted to a metal heat sink. I don't remember the KEI part number for that transistor, but sometimes the plastic molded cases were red or green.

Please describe the transistor and any numbers, etc. printed on it.

Report message to a moderator

Re: Power amp Transistor replacement [message #23828 is a reply to message #23826]

Sat, 12 September 2015 12:38

Mrd34d
Messages: 9
Registered: September 2015

Junior Member

I would love to post a picture (it would be easier) but apparently I need 10 posts for that..I have no idea I've done.

Anyway, it's green, rectangular, and has LECG292 - 274 - and the last line I can't tell if it's right side up or upside down.
It's either 2S08HSY or Y(upside down) SH8052

Report message to a moderator

Re: Power amp Transistor replacement [message #23829 is a reply to message #23823]

Sat, 12 September 2015 14:34

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

Order up the NTE 129 along with a slip on star type heat sink and you will golden!

Report message to a moderator

Re: Power amp Transistor replacement [message #23831 is a reply to message #23823]

Sat, 12 September 2015 19:58

chicagobill
Messages: 2006
Registered: April 2003

Senior Member

Is the transistor flat on a u-shaped metal heat sink with three flat leads coming out of one edge? If it is then it is a TO-220 case and the basing will be different than the NTE129. If the transistor is a round metal cased unit with the lead coming out of the bottom then the NTE129 will fit the same pc pattern.

Wait a sec, could the lettering be ECG292? Do the leads fit the board directly or is the transistor mounted standing up with the legs twisted around to fit in?

Report message to a moderator

Previous Topic:	Sidewinder Diode CR1 & CR2 replacement (part no: 007-6011-00)
Next Topic:	Plastic handles

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Tue Nov 12 21:17:50 EST 2024