VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » pot meters (Kustom 100-2)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
pot meters [message #29281] Thu, 27 June 2024 17:03 Go to next message
Benno is currently offline  Benno
Messages: 1
Registered: June 2024
Junior Member
Hello all,
I need to replace the 15 kOhm volume pot on a KUSTOM 100-2, but it is very difficult to find. Most of all because of the 5/8"threaded bushing.
Any suggestions?
Thanks,
Ben

Report message to a moderator

Re: pot meters [message #29282 is a reply to message #29281] Thu, 27 June 2024 18:07 Go to previous message
stevem is currently offline  stevem
Messages: 4747
Registered: June 2004
Location: NY
Senior Member
Is the pot physically ok, just very scratchy and intermittent even after flushing it out well with cleaner?
Do you have the pot removed from the board?

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Kustom Studio 4V - Schematic needed
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sun Jun 30 08:56:46 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software