VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » K200A-1 Schematic
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
K200A-1 Schematic [message #6159] Sat, 17 September 2005 16:02 Go to next message
jackchapman is currently offline  jackchapman
Messages: 12
Registered: August 2005
Location: Harlingen,Texas
Junior Member
I have found that the schematic and board layout for the PC702 board in a K200A-1 is very close to the schematic and layout of a 400 watt PC704A. Just about all transistor placements and part numbers are the same. Sure came in handy when troubleshooting my K200A-1.

Jack

Report message to a moderator

Re: K200A-1 Schematic [message #6160 is a reply to message #6159] Mon, 19 September 2005 08:20 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
Sorry, I wish I would have known, as I have those model 400 layouts.

Report message to a moderator

Re: K200A-1 Schematic [message #6175 is a reply to message #6159] Mon, 26 September 2005 23:35 Go to previous messageGo to next message
jackchapman is currently offline  jackchapman
Messages: 12
Registered: August 2005
Location: Harlingen,Texas
Junior Member
Just a quick note......My K200A-1 has a voltage regulator that supplies 26 volts to the pre-amp boards. I kept thinking that something was wrong as the later models all use an 8volt + or - voltage regulator. This amp works great now that I have gone through it and replaced missing and non-working parts. I took a chance and powered up with the 26 volts to the pre-amps and it sounds very good!

Jack

Report message to a moderator

Re: K200A-1 Schematic [message #6176 is a reply to message #6159] Tue, 27 September 2005 08:23 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
Nice job! Play on my friend.

Report message to a moderator

icon5.gif  K200A-1 Schematic [message #6516 is a reply to message #6160] Mon, 09 January 2006 07:59 Go to previous messageGo to next message
jodymc is currently offline  jodymc
Messages: 4
Registered: January 2006
Junior Member
Hi guys.
New to the site.
I have an old K200A-1 head and I burnt a few transistors/resistors to the point of being unrecognizable. Don't ask how I did it. Jackchapman and Stevem - you guys seem to have some schematics for this. I've looked everywhere on the web and I can't find schematics for this amp. I've even tried on this site. I need to bring'er back to life. Can you guys help?

Jody

Report message to a moderator

Re: K200A-1 Schematic [message #6518 is a reply to message #6159] Mon, 09 January 2006 08:33 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
What are the board numbers you need the schematics for? If I do not have them you can I guy named Bob Monday in Ohio at SSI industries. 516 761 2677 231 north bend rd cincinatti OH 45216. He will need the board numbers also.

Report message to a moderator

Re: K200A-1 Schematic [message #6519 is a reply to message #6516] Mon, 09 January 2006 09:22 Go to previous messageGo to next message
jackchapman is currently offline  jackchapman
Messages: 12
Registered: August 2005
Location: Harlingen,Texas
Junior Member
Jody,
I have the same head....the schematics from a 400 watt head has almost the exact boards and parts as the one you have. I can e-mail you copies of the schematics that I have. I also can tell you the part numbers of the transistors if you send me a close picture of the board.......also need the board number from the face of the circuit board. Will be PC107, PC702, etc.

E-mail........jack-chapman@sbcglobal.net

Jack

Report message to a moderator

Re: K200A-1 Schematic [message #6616 is a reply to message #6159] Sat, 04 February 2006 20:53 Go to previous messageGo to next message
jodymc is currently offline  jodymc
Messages: 4
Registered: January 2006
Junior Member
hey guys
sorry to take so long getting back, working lots, should be playing music...
thanks for the replies
the board is a Ross PC702

Jody

Report message to a moderator

Re: K200A-1 Schematic [message #6619 is a reply to message #6616] Tue, 07 February 2006 18:23 Go to previous messageGo to next message
jackchapman is currently offline  jackchapman
Messages: 12
Registered: August 2005
Location: Harlingen,Texas
Junior Member
Jody,
I have a schematic that will work for your PC702........need e-mail address to send it to.

Jack

Report message to a moderator

Re: K200A-1 Schematic [message #6638 is a reply to message #6619] Thu, 16 February 2006 20:51 Go to previous messageGo to next message
jodymc is currently offline  jodymc
Messages: 4
Registered: January 2006
Junior Member
Jack
thanks for the info. Check your e-mail for my address.
As a side note, I plan to try using that head for vocals... do you guys think it might work?

Jody

Report message to a moderator

Re: K200A-1 Schematic [message #6641 is a reply to message #6159] Fri, 17 February 2006 07:43 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
yes, it will work for vocals but it may sound a little toppy and boomy at the same time due to the EQ difference from the real PA model and the instrument model. If you have or can get one of those MXR brand graphic EQ stomp boxes, that may be a cure if the tone thing does not work out straight in with a mic.

Report message to a moderator

Re: K200A-1 Schematic [message #6823 is a reply to message #6159] Sun, 26 March 2006 21:41 Go to previous messageGo to next message
jodymc is currently offline  jodymc
Messages: 4
Registered: January 2006
Junior Member
Hi guys
Jack did ya forget about me? Sad
Still waiting for schematics for PC702...
junaberry@hotmail.com
thanks
jod

Jody

Report message to a moderator

Re: K200A-1 Schematic [message #6826 is a reply to message #6823] Mon, 27 March 2006 11:57 Go to previous messageGo to next message
jackchapman is currently offline  jackchapman
Messages: 12
Registered: August 2005
Location: Harlingen,Texas
Junior Member
Jody, I had already sent the schematic, but I sent it again today..3/27/06. If you do not receive the e-mail with the attachment, let me know and I can mail you a copy.

Jack

Report message to a moderator

Re: K200A-1 Schematic [message #15849 is a reply to message #6159] Mon, 13 June 2011 22:00 Go to previous message
ampcabinets is currently offline  ampcabinets
Messages: 10
Registered: August 2010
Junior Member
do you still have a schmatic for the PC702 board. I could sure use a copy. I am working on a k200A-1 a fella gave me, for nothing.
thanks
rob
ampcabinets.net
ampcabinets at sbcglobal.net

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Kustom Tuck N Roll 200 White Noise
Next Topic: part substitute problem
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Thu Nov 14 04:59:52 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software