VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Replacement Part Suggestions » Repair (K150-8 noise)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Repair [message #28521 is a reply to message #28494] Tue, 12 April 2022 10:30 Go to previous messageGo to previous message
chicagobill
Messages: 2006
Registered: April 2003
Senior Member
Most Kustom amps used a tank with the input and output grounded. The correct way to test to see which tank should be used in your amp, would be to test the ground connections on the RCA jacks mounted to the pc board.

There are two jacks, one for send and one for the return. Normally the return jack has a connected ground circuit, meaning that the shell part of the jack is directly connected to the ground trace on the pc board. Usually the send jack is not directly connected to the ground circuit and therefore needs to be connected to the circuit by the ground connection inside the reverb tank.

Unplug the tank from the PC board. Take your ohmmeter and read the resistance from both RCA jacks shell connections and see if one or both are connected to the ground (chassis) circuit. If both are connected to ground, then your tank should be insulated input grounded output. If only the return jack is connected to ground, then both jacks should be be grounded.

All of this information is only for the older plexifront amps. The slant metal front amps of the 70's used an IC chip to drive the tank as part of its feedback loop, and therefore need an isolated input jack.

So long story short, in my opinion you have the correct tank.
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Bass filter for cabinet
Next Topic: K250
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Wed Nov 13 21:03:41 EST 2024