VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Replacement Part Suggestions » K 400b-4 (stereo amp?)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: K 400b-4 [message #20842 is a reply to message #20841] Sun, 29 June 2014 22:57 Go to previous messageGo to previous message
pleat is currently offline  pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi
Senior Member
The 511B horns are too deep to fit in a kustom cabinet and that horn uses a bolt on driver. The Kustom543 horn with driver I spotted on ebay are for the newer 215+H T&R cabs and the later hard tolex big K series.

You could use those but it would require making new speaker boards and make a rectangular opening for the horn to bolt to.

Here is a cheap 10" horn that you could make a reducer ring and adapt down the 15" opening with a piece of plywood, and cut the hole for the 10 horn. They also have drivers and cross overs.

http://www.parts-express.com/dayton-audio-h10rw-10-round-wav eguide-1-threaded--270-310

pleat
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: 745 PA Amp
Next Topic: K-400b update
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Tue Sep 24 15:21:33 EDT 2024