VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » A-4 Repair (Unwanted distortion)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: A-4 Repair [message #26543 is a reply to message #26541] Fri, 09 February 2018 18:30 Go to previous messageGo to previous message
Jonomega3 is currently offline  Jonomega3
Messages: 81
Registered: November 2012
Member
Because my voltmeter prongs couldn't reach the farthest prongs of the transitors I was only able to measure the collector and base of 701 and 702, both on the collector were -34. On the base of 701 216 mv and 702 was 253 mv on the base. 703 was -34 on the base and -35 on the emitter. I am thinking so far they are not that far off?

Are there special leads you can get for the multimeter to read these transistors? If so where are they available? Or would you detach the board and read them from the backside solder points? In any case, its pretty tricky I must say

[Updated on: Fri, 09 February 2018 18:46]

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Kustom 300 PA head needs repair
Next Topic: Kombo I organ keyboard contacts access
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Tue Nov 05 01:46:16 EST 2024