VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » 5 Transistor Frank Schematic Needed (Testing results)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: 5 Transistor Frank Schematic Needed [message #15103 is a reply to message #15052] Sat, 15 January 2011 11:34 Go to previous messageGo to previous message
stevem is currently offline  stevem
Messages: 4747
Registered: June 2004
Location: NY
Senior Member
Go with the resistor values from the output transistors on the Frank schematic you have, or from that power amp section you put into the other amp.
You want the output trnasistors to idle at close to the voltage and temperature of these other amps.
Just remember to switch those wires, here`s the reason why.
Going from PNP TO NPN types, or the other way reverses the Phase of the output stage. In a feedback type amp like the Kustom this will make the amp howl like mad when you turn it on, swapping the V+ and V- wires reverses the Phase once again so you are back to where you started.
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Another Frankie
Next Topic: Looking for Scematics
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sat Jun 29 12:31:36 EDT 2024