VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Replacement Part Suggestions » K300 power transformer (Need a part)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
K300 power transformer [message #28261] Tue, 06 July 2021 13:05 Go to next message
Arnienmj is currently offline  Arnienmj
Messages: 4
Registered: June 2021
Junior Member
Does anyone know where I can get a power transformer for a Kustom K300 OR does anyone know a model number for that transformer?

Report message to a moderator

Re: K300 power transformer [message #28262 is a reply to message #28261] Tue, 06 July 2021 14:49 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4773
Registered: June 2004
Location: NY
Senior Member
Hi.
Well I have one that I may part with, I just have to put some thought into it, but mean while your only other possible hope will be a new Toroid type.
Avel-Linburg in Ct makes one that will do the job and it's part number Y236902.
It sells for $118.00 before shipping .

This is a modern doughnut style that you need to mount by drilling a hole in the rear wall of the amp.

[Updated on: Tue, 06 July 2021 14:50]

Report message to a moderator

Re: K300 power transformer [message #28263 is a reply to message #28262] Tue, 06 July 2021 16:49 Go to previous messageGo to next message
Arnienmj is currently offline  Arnienmj
Messages: 4
Registered: June 2021
Junior Member
Thank you for both options! great info!

Report message to a moderator

Re: K300 power transformer [message #28264 is a reply to message #28261] Tue, 06 July 2021 17:26 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4773
Registered: June 2004
Location: NY
Senior Member
Are you sure the PT is bad and it's not just shorted diodes , or even a shorted choke which the amp has?

I mean PTs in these amp are quite hardy!

Report message to a moderator

Re: K300 power transformer [message #28265 is a reply to message #28261] Tue, 06 July 2021 18:22 Go to previous messageGo to next message
Arnienmj is currently offline  Arnienmj
Messages: 4
Registered: June 2021
Junior Member
I'm not sure. I took it to an amp repair shop and the gentleman said, the transformer was bad. I'm the worst with electronics like this.

Report message to a moderator

Re: K300 power transformer [message #28266 is a reply to message #28261] Tue, 06 July 2021 18:32 Go to previous message
Arnienmj is currently offline  Arnienmj
Messages: 4
Registered: June 2021
Junior Member
I'm not sure. I took it to a highly recommended amp repairshop and the gentleman told me it was the PT. I know very little about amps. I don't know where to start looking.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: 1N4007 diode
Next Topic: Kpm160 mixer
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sat Nov 02 10:02:58 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software