VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » Kustom 100 blowing fuse (Kustom 100 )
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Kustom 100 blowing fuse [message #27239 is a reply to message #18016] Fri, 12 April 2019 21:02 Go to previous messageGo to previous message
JDinPA17603 is currently offline  JDinPA17603
Messages: 72
Registered: May 2018
Location: Lancaster, PA
Member
Time traveler
You stated that when you unplugged the three pin molex connector from the 5033 board that the fuse did not blow.
Question - were the red and green wires connected to all boards at the main capacitors at that time?
If so was the pilot light working at that time?
If the red and green wires were connected to all of the boards and the fuse did not blow when the molex was unplugged then I agree with Bill, the cause of the overload definitely points to the 5033.
Also agreeing with Steve bad idea to just unhook the red wire from the 5033 or any of the boards by itself.
From the board configuration and model it appears we are discussing a Kustom Commander with 2 12" speakers. If my model is off then a Kustom Hustler with 4 10" speakers.
I also noted you stated that the fuse did not blow with the red wires disconnected from the caps.
This is the reason for my question of were the red wires connected to the caps with the molex plug pulled.
Steve and Bill not trying to take over here, just trying to fully understand the situation.
John


Old Us Navy Vietnam Vet
Playing for my own enjoyment and irritation of the neighbors.

[Updated on: Fri, 12 April 2019 21:07]

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: K200A-1 Power Amp Rescue Needed
Next Topic: Kustom III lead pc board 5065 rev2
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Tue Dec 24 12:32:29 EST 2024