VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » Kustom 100 blowing fuse (Kustom 100 )
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Kustom 100 blowing fuse [message #27346 is a reply to message #18016] Tue, 04 June 2019 23:28 Go to previous messageGo to previous message
chicagobill
Messages: 2010
Registered: April 2003
Senior Member
The generic number for that diode is 1N3754.

It has not been made for about 20 years now, so they are difficult to find. Is your's dead?

You can replace it with a typical signal diode like a 1N4148, but you will need to try and figure out a way to mount it close to the power transistor heatsink. It is supposed to sense the temperature of the output transistors and adjust the bias as the transistors heat up.

As for your capacitor question, I assume that you are asking about the tantalum caps. The dot usually identifies the positive lead, but there is a marking style that uses a color dot to signify part of the caps value (color code). Are the caps marked with the usual number markings?
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: K200A-1 Power Amp Rescue Needed
Next Topic: Kustom III lead pc board 5065 rev2
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sun Dec 29 19:44:40 EST 2024