| (2) Kustom cabinets - 2x10" + 2x12" [message #22489] |
Sun, 22 February 2015 09:30  |
braud357
Messages: 154
Registered: July 2010
Location: Louisiana
|
Senior Member |
|
|
Offered for sale are (2) black "tuck & roll" Kustom cabinets. Here is the story - cabinet #1 started life as a 3x12 cabinet. A new speaker baffle was constructed from 3/4" birch plywood to accommodate the 2x10's + 2x12's, with its intended usage as a bass guitar cabinet. Speakers used were (2) Eminence Delta 10", and (2) Carvin PS12 12". The speakers were wired separately, so that they could be controlled independently with my dual monoblock Carvin amp. Being the original handles were trashed, I opted to install HD spring-loaded rack handles. A steel jack plate was installed, and new grille cloth was installed. Cabinet #2 started life as a genuine 2x10 + 2x12 cabinet. In order for these 2 cabinets to match up perfectly, a new speaker baffle was made from 3/4 birch plywood, and new grill cloth was installed. The original back panel was used, with the port holes plugged with plywood inserts, and the back panel was covered in new naugahyde. This cabinet also has the HD handles and a steel jack plate. The speakers in this one are also wired separately, with each cabinet yielding (2) 4 ohm loads. They each have a slip cover (from amplifiercovers.com) with a vinyl "Kustom" decal. They only reason I am selling them is that I have had to go to a much smaller rig to compensate for my bad back. I am willing to sell with or without speakers - $275 each for unloaded cabinet and cover, or $400 each for loaded cabinet and cover. I am willing to ship, but buyer will have to pay actual shipping costs. These cabinets need to be on stage! Contact me at braud357_2@yahoo.com
|
|
|
|
|
|
VintageKustom.com
Search
Help
Members
Register
Login
Home
]