VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Repairing Kustom Amps » Kustom 100 blowing fuse (Kustom 100 )
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: Kustom 100 blowing fuse [message #27235 is a reply to message #18016] Fri, 12 April 2019 06:10 Go to previous messageGo to previous message
stevem is currently offline  stevem
Messages: 4778
Registered: June 2004
Location: NY
Senior Member
To help you better we atleast need to know if the K100 model you have is a combo type, or a piggiy back model?
Both the K100-1 and K100-2 are piggy back models and have but one main circuit board mounted to the front of the amp.

If you have replaced both output transistors and the driver Transistors you may still have a bad Tantaum type cap that is shorted, but I would think that a fully bad cap like that would be showing signs of being burned and black if not blown near apart to be taking the fuse out like that !
If you disconnect the red wire on each of the output Transistors on the chassis does the fuse still blow?
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: K200A-1 Power Amp Rescue Needed
Next Topic: Kustom III lead pc board 5065 rev2
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Thu Dec 26 09:48:03 EST 2024