VintageKustom.com: Comment Board » Question on cabinet for 150 head

Home » VintageKustom.com » Comment Board » Question on cabinet for 150 head (Will it work?)

Show: Today's Messages :: Polls :: Message Navigator

Question on cabinet for 150 head [message #27215]

Wed, 20 March 2019 09:20

JDinPA17603
Messages: 69
Registered: May 2018
Location: Lancaster, PA

Member

Picking up a 150 head on Sunday that the owner say "has an issue. When you try to play it"
System is separate head and speaker cabs. I have a fully functional 250 head. Wondering if the 250 will fit in the 150's cabinet. That way I'll have a working system while I sort out the "issue" with the 150.

Oh yeah, it's a 2-12G in BLUE

Thanks,

Old Us Navy Vietnam Vet
Playing for my own enjoyment and irritation of the neighbors.

Report message to a moderator

Re: Question on cabinet for 150 head [message #27216 is a reply to message #27215]

Wed, 20 March 2019 11:06

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

The 250 head is some 3 inches longer so it will not fit.

Report message to a moderator

Re: Question on cabinet for 150 head [message #27217 is a reply to message #27216]

Wed, 20 March 2019 11:40

JDinPA17603
Messages: 69
Registered: May 2018
Location: Lancaster, PA

Member

Thanks Steve.My brain is getting foggy in my old age. They sent me a picture about two minutes ago and Counting the pleats it became obvious. Can't wait to get it here. Same blue sparkle as the one I had in '68. The cabs look pristine on it.I have the 250 along with a few more that have migrated my way over the past six months including a 150 combo that I love the sound of. My herd is growing and my wife says I got to get back on the bench and thin the herd down.

I am guessing that the Molexes will need cleaned and the pots. Thanks again for the info. I will be on the tech board with it if I run into any roadblocks.
Oh yes, it is a 2-12G-2 with the trem and reverb

John

Old Us Navy Vietnam Vet
Playing for my own enjoyment and irritation of the neighbors.

[Updated on: Wed, 20 March 2019 11:48]

Report message to a moderator

Re: Question on cabinet for 150 head [message #27218 is a reply to message #27215]

Wed, 20 March 2019 12:19

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

Be carful plugging the Connectors back in especially the one on the driver board as I have had a few of them with not so great solder connections on the bottom of it and if the ground of those 3 wires on the driver goes intermittent you will blow that board.

[Updated on: Wed, 20 March 2019 12:19]

Report message to a moderator

Re: Question on cabinet for 150 head [message #27219 is a reply to message #27218]

Wed, 20 March 2019 19:16

JDinPA17603
Messages: 69
Registered: May 2018
Location: Lancaster, PA

Member

Steve, thanks for that tip. I will keep you apprised of what I find.

Old Us Navy Vietnam Vet
Playing for my own enjoyment and irritation of the neighbors.

Report message to a moderator

Previous Topic:	I Have Some Kustom Stuff For Sale
Next Topic:	Kustom PA horn cabinet info

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Fri Nov 08 00:41:56 EST 2024