VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.

Home » VintageKustom.com » Replacement Part Suggestions » K 400b-4 (stereo amp?)
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Re: K 400b-4 [message #20832 is a reply to message #20831] Sun, 29 June 2014 16:49 Go to previous messageGo to previous message
rodak
Messages: 514
Registered: October 2001
Location: Georgia
Senior Member
I don't know what the original crossover point was for those horns. I'm guessing it's in the neighborhood of 1,000hz. Here's a nice looking 1,600hz crossover:

http://www.parts-express.com/eminence-pxb-1k6-high-pass-cros sover-board-1600-hz--290-600

18db/octave, so it's sufficiently steep that you shouldn't have to worry about any bass frequencies getting through.

Here's another:
http://www.parts-express.com/800-hz-high-pass-8-ohm-crossove r--266-470

800hz, 12db/octave. Not as steep, but still better than the original single capacitor (which, I believe, is only 6db/octave). But the more gradual rolloff may actually sound better, I'm not sure.

Of course, these are both designed for 8 ohm drivers. If the Kustom horns are 16ohms, that would change the crossover point, although I'm not sure in which direction or how much. (as you can see, I know *some* of this stuff, but I'm hardly an expert)

You may also want to add an L-pad (level control):

http://www.parts-express.com/speaker-l-pad-attenuator-100w-m ono-1-shaft-8-ohm--260-265




www.combo-organ.com
[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: 745 PA Amp
Next Topic: K-400b update
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Sun Aug 11 05:38:23 EDT 2024