VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » K25-2 Tansformer Question (Transformer replacement options)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
K25-2 Tansformer Question [message #26407] Sun, 26 November 2017 16:39 Go to next message
foppstar is currently offline  foppstar
Messages: 1
Registered: November 2017
Junior Member
Hello everyone. I am looking for a replacement transformer for a K25-2 amp. The transformer is completely rusted and I cannot read any of the numbers stamped in it.

Has anyone found or know of a replacement transformer I could use with this amp?

Thank you in advance! Smile

Report message to a moderator

Re: K25-2 Tansformer Question [message #26408 is a reply to message #26407] Mon, 27 November 2017 06:09 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
Hello!
Even if you could read the stampings end bells of the transformer it would not help you to know how much voltage and current the power transformer needs to output!

Is the Transformer bad as in it will blow fuses with the secondary wires disconnected , or just very rusty ?

Dispite what you might have heard , rust on the iron plate Core does not matter unless it goes very deep into the core plates!

If you reply back that indeed the transformer is bad you will need to give me a day or 2 to find a new replacement for you .

Report message to a moderator

Re: K25-2 Tansformer Question [message #26409 is a reply to message #26408] Mon, 27 November 2017 12:24 Go to previous message
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
If you indeed need a new transformer I found 2 different brands that will work.
These are Toridal types a will need to be mounted by 1 new bolt hole that will need to be drilled.

One brand is a Triad and the part number is VPM48-1040

The other one is a Avel Lindberg y236404.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: K200-B5 reverb questions
Next Topic: K200 B-1 LF oscillation
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Wed Nov 13 21:59:51 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software