VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Need help with my k200b-1 (same resistor & transistor burn out ?)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Need help with my k200b-1 [message #28258] Thu, 01 July 2021 12:08 Go to next message
M.Gray is currently offline  M.Gray
Messages: 3
Registered: June 2021
Location: mbgray871@gmail.com
Junior Member
Hello, ever one, I'm new to the forum. I have read posts in the past and found them to be very helpful. I've got a k200b-1 amp that keeps burning out the same resistor R736 and transistor Q2, if I'm reading the schematic right. I'm just a novice when it comes to electronics. something has shorted and i don't know where to look. So I'm hoping someone would point me in the right direction.

Report message to a moderator

Re: Need help with my k200b-1 [message #28260 is a reply to message #28258] Thu, 01 July 2021 14:29 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4774
Registered: June 2004
Location: NY
Senior Member
What Transistor are you using to replace Q2.

Report message to a moderator

Re: Need help with my k200b-1 [message #28268 is a reply to message #28260] Thu, 08 July 2021 13:37 Go to previous messageGo to next message
M.Gray is currently offline  M.Gray
Messages: 3
Registered: June 2021
Location: mbgray871@gmail.com
Junior Member
I'm using a 2n3055 replacement for 36892

Report message to a moderator

Re: Need help with my k200b-1 [message #28269 is a reply to message #28258] Thu, 08 July 2021 13:40 Go to previous messageGo to next message
M.Gray is currently offline  M.Gray
Messages: 3
Registered: June 2021
Location: mbgray871@gmail.com
Junior Member
No Message Body

[Updated on: Thu, 08 July 2021 20:34]

Report message to a moderator

Re: Need help with my k200b-1 [message #28270 is a reply to message #28269] Fri, 09 July 2021 19:09 Go to previous message
stevem is currently offline  stevem
Messages: 4774
Registered: June 2004
Location: NY
Senior Member
Check yo see if r737 is open and if Q708 is good.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Push/ Pull Pot
Next Topic: speaker cabinet wiring
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Wed Nov 06 13:14:51 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software