|
Re: K250 Question [message #28978 is a reply to message #28977] |
Wed, 15 March 2023 06:30 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
stevem
Messages: 4758 Registered: June 2004 Location: NY
|
Senior Member |
|
|
The -1 head is just the non effects head and both the -1 and-2 have the same preamps and output sections.
The -1 head also has about 8 more watts of clean power since it's available power supply current is not being eaten up by the effects circuitry.
That cab is the Bass model and might be a little mellow sounding for you unless you use the brite switch that each channel has.
Either way with 2-15" you will have clean punch like you never heard before and you can always change out the speakers to suite you better if need be.
[Updated on: Wed, 15 March 2023 06:32] Report message to a moderator
|
|
|
|
Re: K250 Question [message #28980 is a reply to message #28977] |
Wed, 15 March 2023 11:45 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
stevem
Messages: 4758 Registered: June 2004 Location: NY
|
Senior Member |
|
|
The standard Bass speakers would have been CTS brand and in some of the later ones KEI.
Up grade optional would have been Altec or JBL.
Jensens would have been used in the non Bass cabs and the model on mounting lip of those speakers was C15L
Hook up that reverb tank you have and see if it will provide you with enough reverb.
The input side of the tank needs to be near the power transformer otherwise you will get 60 hz hum when you turn up the reverb.
Please report back on how it is.
[Updated on: Wed, 15 March 2023 11:47] Report message to a moderator
|
|
|
|
|