VintageKustom.com: Replacement Part Suggestions

Home » VintageKustom.com » Replacement Part Suggestions » Replacement Handle Inserts (Aluminum Inserts for the handles)

Show: Today's Messages :: Polls :: Message Navigator

Replacement Handle Inserts [message #13514]

Fri, 30 April 2010 20:26

pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi

Senior Member

I found a small shop that will sandcast aluminum handle inserts, and drill and tap for the screws to mount the insert to the strap part of the handle. This would solve once and for all the problems of kustom amps with the strap handle broken or missing. The inserts would long out live any plastic insert. One thing is being aluminum, you could reshape bent straps to the insert. If anyone is interested email at djt@chartermi.net Cost would be determined on the volume of inserts ordered. I'm hoping that we could get them for around 25.0 a pair.
Don

Report message to a moderator

Re: Replacement Handle Inserts [message #13518 is a reply to message #13514]

Sat, 01 May 2010 17:34

kbass20
Messages: 14
Registered: April 2010
Location: Danville, In.

Junior Member

Do you think they could make replacement knobs too? That would be cool if they could make aluminum knobs!

Report message to a moderator

Re: Replacement Handle Inserts [message #13519 is a reply to message #13518]

Sat, 01 May 2010 17:55

pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi

Senior Member

Anything is possible if one has enough money. Never gave much thought to casting the knobs.
pleat

Report message to a moderator

Re: Replacement Handle Inserts [message #13527 is a reply to message #13514]

Mon, 03 May 2010 05:59

stevem
Messages: 4775
Registered: June 2004
Location: NY

Senior Member

Aluminum knobs would be a problem on some controls in differening Kustom models as the knob would conduct,and if you where playing guitar thru the amp and holding the strings you would ge a big buzz thru the speaker)s)!

Report message to a moderator

Re: Replacement Handle Inserts [message #13533 is a reply to message #13514]

Mon, 03 May 2010 11:54

chicagobill
Messages: 2006
Registered: April 2003

Senior Member

Kool idea Pleat.

Were you thinking of having them painted or anodized?

Maybe anodized in matching colors! Rolling Eyes

Report message to a moderator

Re: Replacement Handle Inserts [message #13537 is a reply to message #13527]

Mon, 03 May 2010 12:35

pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi

Senior Member

Good to know, thats why I never claim to be a tech. I never would have thought of that issue. I know Acoustic and Peavey offered amps with aluminum knobs, but I think they used pots with plastic shafts.
pleat

Report message to a moderator

Re: Replacement Handle Inserts [message #13538 is a reply to message #13533]

Mon, 03 May 2010 12:50

pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi

Senior Member

I do have a anodizing company I use for my Tremorbender B sting Bender that I manufacture. The benders are available in satin silver and satin black. They could do them for 2.00 each. Colors could be done, but I don't think we would ever have a large enough order at one time to do different colors. If we chose satin black as the color it would keeps things a lot easier. It also makes it easy for future amps we aquire that needs inserts to just install the black insert. I'd hate to have some red inserts and buy a cascade amp that needs inserts and have to use red inserts.
pleat

Report message to a moderator

Re: Replacement Handle Inserts [message #13540 is a reply to message #13514]

Mon, 03 May 2010 15:18

chicagobill
Messages: 2006
Registered: April 2003

Senior Member

OK, I was only kidding about the matching colors.
Black would look more original as well.

As for metal knobs, most if not all Kustom amps used metal shafts on the pots. The pots were all grounded to the chassis, so there should not be any problem with metal knobs, other than originality.

Report message to a moderator

Re: Replacement Handle Inserts [message #13554 is a reply to message #13540]

Tue, 04 May 2010 23:28

kbass20
Messages: 14
Registered: April 2010
Location: Danville, In.

Junior Member

The only reason I said something about the knobs, is because I can't seem to find an matching knobs unless they come off of a donor.

Report message to a moderator

Re: Replacement Handle Inserts [message #13563 is a reply to message #13554]

Wed, 05 May 2010 07:19

pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi

Senior Member

I think somewhaer on this site they have found a place to get knobs. Smallstone electronics I think? Are you looking for the knobs with set screws or the push on style that the slant face amps used? I have some extra push on knobs.
pleat

Report message to a moderator

Re: Replacement Handle Inserts [message #13568 is a reply to message #13514]

Wed, 05 May 2010 12:05

chicagobill
Messages: 2006
Registered: April 2003

Senior Member

The source for exact matching knobs for the K200 series amps is Small Bear Electronics.

I know that I posted a link last year about this.

Report message to a moderator

Previous Topic:	K200B 2 and K200B 4 schematics?
Next Topic:	for those of you looking for kustom style handles

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Tue Nov 12 21:01:42 EST 2024