VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » Classified Ads » Wanted » Kustom Chrome Stand for K200 A-5 PA
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Kustom Chrome Stand for K200 A-5 PA [message #18802] Wed, 29 May 2013 10:26 Go to next message
janalex is currently offline  janalex
Messages: 11
Registered: May 2013
Junior Member
Hi,

Looking to purchase the corresponding stand for my Tuck and Roll PA.

Please email.

jae2006@msn.com

Thanks

Report message to a moderator

Re: Kustom Chrome Stand for K200 A-5 PA [message #18803 is a reply to message #18802] Wed, 29 May 2013 19:29 Go to previous messageGo to next message
Kustom_Bart is currently offline  Kustom_Bart
Messages: 601
Registered: October 2010
Location: Greenville, MichiGUN
Senior Member
Very tough and even tougher are the knobs to hold the stand to the head. I have a stand that is the 2 piece stand and one side is nice and the other side is all rusty that I picked up for my K400 and I am going to have to make the connector piece for the bottom rear and have it all blasted and most likely powder coat it black.

It cost me 60.00 and I am going to have at least that if not more into making it usable and I still don't have the proper knobs to hold it to the head.

Report message to a moderator

Re: Kustom Chrome Stand for K200 A-5 PA [message #18811 is a reply to message #18802] Fri, 31 May 2013 19:32 Go to previous messageGo to next message
kustomoholic is currently offline  kustomoholic
Messages: 227
Registered: March 2009
Location: Tulsa,oklahoma
Senior Member
I have a Cascade A5 head (22xxx) that did not come with the stand mounts. I thought the stands started with the B series heads. As Bart says they are hard to find and the knob bolts are even harder tho a usable substitute can be made.

Report message to a moderator

Re: Kustom Chrome Stand for K200 A-5 PA [message #19292 is a reply to message #18803] Tue, 03 September 2013 08:24 Go to previous message
fat elvis is currently offline  fat elvis
Messages: 1
Registered: September 2013
Location: Bellevue, KY
Junior Member
I have a couple of sets of NOS hdw for the PA stands including the knobs and the serated discs... pm me...

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: knobs"original kustom"
Next Topic: Covers wanted
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Thu Nov 07 03:43:52 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software