VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Kustom cab (input jack)
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Kustom cab [message #25704] Mon, 12 December 2016 20:34 Go to next message
timmyshazam is currently offline  timmyshazam
Messages: 1
Registered: December 2016
Location: Appalachian Mtns
Junior Member
I picked up an old tuck and roll cab. The cab has spring clips for input jack. I want to change to 1/4. Is there a particular jack I should buy or will any 1/4 input/output jack work?

Thanks.

Report message to a moderator

Re: Kustom cab [message #25705 is a reply to message #25704] Tue, 13 December 2016 06:18 Go to previous message
stevem is currently offline  stevem
Messages: 4775
Registered: June 2004
Location: NY
Senior Member
From Antique electronics order a WC-SC-11.
Be sure to wire the + wire to the new jacks tip connection!

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: Kustom Studio 2 valve (or series ) schematic
Next Topic: Help
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Tue Nov 19 13:07:47 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software