|
Re: Foot switch for K150 [message #19448 is a reply to message #19436] |
Sat, 28 September 2013 11:18 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
chicagobill
Messages: 2005 Registered: April 2003
|
Senior Member |
|
|
Yes. I thought that I remembered seeing one on eBay recently, but it was a four switch unit.
You will need to get an 4 pin plug that matches the socket and just wire it up.
|
|
|
|
|
|
|
|
Re: Foot switch for K150 [message #19463 is a reply to message #19436] |
Sun, 29 September 2013 07:49 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) ![Go to next message Go to next message](/FUDforum/theme/vk30/images/down.png) |
stevem
Messages: 4763 Registered: June 2004 Location: NY
|
Senior Member |
|
|
Thy to get a 4 pin male XLR made by Neutrik. they are easy to work with and have a better type strain releaf set up to them that will not bit into the outer jacket insulation of the cable to the point of cutting thru it in use.
The face of the connector where the pins exit from are numbered for easy wire reference.
[Updated on: Sun, 29 September 2013 07:56] Report message to a moderator
|
|
|
|
|
Re: Foot switch for K150 [message #19477 is a reply to message #19436] |
Wed, 02 October 2013 02:29 ![Go to previous message Go to previous message](/FUDforum/theme/vk30/images/up.png) |
chicagobill
Messages: 2005 Registered: April 2003
|
Senior Member |
|
|
The light bulbs in the footswitches are the same ones used in the power switches, a GE#335. If they are burned out, they can be easily replaced.
The 4 unit one that sold a few weeks ago sold for somewhere around $129.00 I think. I don't know if the two button one would be more popular or not.
These just don't come up very often, so if you really want it I guess you just have to bid what you're willing to pay.
|
|
|