VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Replacement Part Suggestions » Replcement Ball Casters
Show: Today's Messages :: Polls :: Message Navigator
Return to the default flat view Create a new topic Submit Reply
Replcement Ball Casters [message #29063] Wed, 26 July 2023 15:47 Go to previous message
rodak
Messages: 516
Registered: October 2001
Location: Georgia
Senior Member
One of the casters on my K200 is missing some bearings, and the cabinet tends to swerve pretty bad to one side - really annoying. Perusing old posts here it seems Grainger was the go-to supplier for good ball casters, but at one point I saw it mentioned that they were no longer made, or priced too high. Well, taking the supplied part number (5X758) to grainger.com showed they were indeed discontinued, but they had a link to a replacement:

https://www.grainger.com/product/GRAINGER-APPROVED-Standard- Plate-Caster-2-in-437V29?opr=ILOF

Looks pretty good, and the price is certainly right, almost too good - a buck.43 each? Even with shipping, a set of four will set me back less than 20 bucks.

Anyone see anything wrong with these? The size and weight capacity appear to be the same.

www.combo-organ.com

Report message to a moderator

[Message index]
 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Replacement Pilot Bulb for Kustom 200
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Thu Oct 31 23:49:44 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software