VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Repairing/replacing naugahide
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Repairing/replacing naugahide [message #24564] Sat, 30 January 2016 08:59 Go to next message
slk854 is currently offline  slk854
Messages: 192
Registered: January 2015
Senior Member
Ok guys how hard would it be to replace the naugahide on the lower front of a black 300 PA. I don't know how this one got torn but the entire lower piece across the bottom has a piece of black tape on it. This part has no tuck and roll. The sides and top appear to be ok. Has any ever done this type of repair? If needed I can post some pics later, but just wanted to get an idea.

Steve

Report message to a moderator

Re: Repairing/replacing naugahide [message #24565 is a reply to message #24564] Sat, 30 January 2016 09:25 Go to previous messageGo to next message
pleat is currently offline  pleat
Messages: 1454
Registered: June 2004
Location: Belding, Mi
Senior Member
Most of us call that part of a cab, the toe kick. Really easy to replace especially on an amp head. Remove the chassis bolts and slide out the amp. I remove all the staples of the torn piece and use the torn piece for the pattern of the new covering.

I will staple the new piece at the inside front of the cab at one side and work my way across to the other front side. Pull tight the material at the back side and staple.
Finally I staple the fold over part across the bottom at each end. Kind of trial and error to get it stretched right so you may have to remove a few of your staples and re stretch.

I've found material at home crafts stores, or you could go to an upholstery shop for the material.
pleat

Report message to a moderator

Re: Repairing/replacing naugahide [message #24566 is a reply to message #24565] Sat, 30 January 2016 10:47 Go to previous messageGo to next message
Iowa Boy is currently offline  Iowa Boy
Messages: 767
Registered: June 2014
Senior Member
If you have a Hancock fabric store in your area, they usually have material that is close in there value section. Try to find the heavier vinyl since it will hold it's shape better than the really thin stuff.

Report message to a moderator

Re: Repairing/replacing naugahide [message #24579 is a reply to message #24564] Sat, 30 January 2016 13:21 Go to previous message
Kustom_Bart is currently offline  Kustom_Bart
Messages: 601
Registered: October 2010
Location: Greenville, MichiGUN
Senior Member
My brother does auto interior upholstery and he had a nice roll of black that matched nearly perfect and I took a BIG piece so I would have a bunch for just such occasions. The automotive stuff is the best stuff to use for sure.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: 1967 Kustom 200A4 update
Next Topic: 2 prong cord to three prong
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ]

Current Time: Thu Nov 07 21:27:01 EST 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software