VintageKustom.com: Repairing Kustom Amps

Home » VintageKustom.com » Repairing Kustom Amps » One last question

Show: Today's Messages :: Polls :: Message Navigator

One last question [message #5675]

Tue, 05 April 2005 22:12

srandallf
Messages: 13
Registered: April 2005

Junior Member

Also regarding my new K50-2
the toggle switch on the back...to turn it on...is a 3-way...the middle is off, but up and down are both - on. Is there a difference? it seems to sound the same regardless of up or down...

any info would be helpful..im new to Kustom amps

thanks

Report message to a moderator

Re: One last question [message #5677 is a reply to message #5675]

Tue, 05 April 2005 22:21

voided3
Messages: 200
Registered: July 2004

Senior Member

Hello. Because of their stock two-prong cord, the three way switch is for polarity. Simply put it in the position that gives you the least buzz. However, probably about everyone here would reccomend converting to a three prong cord as it is simple and perhaps life saving, in addition to making your amp buzz less. You would not need to change out the switch if you do this mod, either on position would have the same effect. Good luck!

P.S.-search the forums for detailed instructions on how to do this, i've done it myself before and I am glad I did.

Report message to a moderator

Re: One last question [message #5680 is a reply to message #5677]

Tue, 05 April 2005 22:27

srandallf
Messages: 13
Registered: April 2005

Junior Member

Well, i dont have any buzzat all, but i dont want to fry myself so perhaps ill give it a try or take it to a tech. Thanks

Report message to a moderator

Previous Topic:	K100 Bass amp HUM help
Next Topic:	I think I have a problem

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

]

Current Time: Thu Nov 14 05:04:05 EST 2024