VintageKustom.com
VintageKustom.com is your source for literature and information on the tuck-and-roll vintage Kustom amps from the 60's and 70's, as well as their related products such as guitars and organs . We provide a webboard for help with kustom gear history, technical information and repairs as well as discussions with other collectors.
Home » VintageKustom.com » Repairing Kustom Amps » Schematics for 200-a4
Show: Today's Messages :: Polls :: Message Navigator
Switch to threaded view of this topic Create a new topic Submit Reply
Schematics for 200-a4 [message #9212] Sat, 09 February 2008 12:56 Go to next message
norwegian is currently offline  norwegian
Messages: 10
Registered: October 2007
Location: Norway
Junior Member
Need some schematics for my old 200 a-4.(The one with the fuses in the front) I live in Norway and will pay for the schematics and the shipping. Hope somebody can help me.
I`ve got a problems with the harmonic clipper. The signal is coming and going.

Report message to a moderator

Re: Schematics for 200-a4 [message #9216 is a reply to message #9212] Mon, 11 February 2008 06:16 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4754
Registered: June 2004
Location: NY
Senior Member
Hi, I only have them for the k200B serise, but what is the PC on that clipper board?

Report message to a moderator

Re: Schematics for 200-a4 [message #9226 is a reply to message #9212] Tue, 12 February 2008 15:45 Go to previous messageGo to next message
norwegian is currently offline  norwegian
Messages: 10
Registered: October 2007
Location: Norway
Junior Member
I`ve got a friend that will repair it, and he asked for the schematics. Would you please explain what you mean when you say "pc on the clipper board", and I will take a look. I don`t have much experience with amp-repair words. Thanks for answering and for a good site for Kustom fans!Smile

Report message to a moderator

Re: Schematics for 200-a4 [message #9227 is a reply to message #9212] Wed, 13 February 2008 06:13 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4754
Registered: June 2004
Location: NY
Senior Member
Kustom printed circuit boards, hence PC, are labled on the front side of the board facing the inside metal front of the amp (IE) like PC 105, or PC 105-1 for a revision.
The board will hve to be dropped off the inside face of the amp to see it most times, other times you can shine a strong light at the board while mounted and read it backwards.

Report message to a moderator

Re: Schematics for 200-a4 [message #9300 is a reply to message #9212] Sun, 09 March 2008 12:45 Go to previous messageGo to next message
bassmansince62 is currently offline  bassmansince62
Messages: 1
Registered: March 2008
Location: Cleveland, Ohio
Junior Member
Hey Gang.

Just joined the crew because I just purchased a 1970 K200B-1 W/ 2-15 CTS Cab. (I have been a Fender Fanitic since day one an this my first Kustom --- Sounds like a Dual Showman!)

I see there was a disaster with the hard drive crash. Any one got a Schmatic for the 200B-1?

Also there is what aperas to me an RCA jack on the upper right side of the rear of the head. Anyone know what that might be?(I've been too lazy to pull the back yet.)

While on the subject of Schmatics, I'm in Engineer and have a CAD system. If anyone has any of the Kustom schmatics at all I will gladly redo tham and send them back to the site in AutoCad .dwg and also PDF formats. Looks like after the big crash we all have to chip in and rebuild the libary.

Steve 'da ol' SmokeDog

Steve 'da ol' SmokeDog

Report message to a moderator

Re: Schematics for 200-a4 [message #9303 is a reply to message #9212] Mon, 10 March 2008 09:01 Go to previous messageGo to next message
stevem is currently offline  stevem
Messages: 4754
Registered: June 2004
Location: NY
Senior Member
If you give me a fax number I will get you a schematic(s)
The RCA jack is for a recording output or to feed another amp, I have never measured it but I do not think it will output +4db to fully power most power amps these days.
Oh, buy the way, welcome!

Report message to a moderator

Re: Schematics for 200-a4 [message #9323 is a reply to message #9212] Mon, 17 March 2008 14:19 Go to previous message
norwegian is currently offline  norwegian
Messages: 10
Registered: October 2007
Location: Norway
Junior Member
Hi!

I looked at my 200a4. The number (PC)on the clipper board is 402b. I hope that is correct, and you can help me with schematics.

Anyway, I spoke with the man, who is helping me with the amp. He is about 50 years old and have much experience with amps. He had never seen an old Kustom before (they are were rare in Norway),he was amazed of the high quality on this old transistor amp.I am only 26 years old, but I think the old Kustom is beautiful. I work hard to find the creedence sound. I use similar Gibson and Rickenbacker and I think think Kustom should have a lot of honour for the Fogerty/CCR sound. In comparison with other amps that Fogerty is using, I think the Kustom amp has the nicest sound. Kustom- that is the Fogerty sound for me, and I have played CCR since I was 14. So I would be very happy if you can help me.
Keep up the good work on this site.

Report message to a moderator

  Switch to threaded view of this topic Create a new topic Submit Reply
Previous Topic: new/ old item for blk T&R repair
Next Topic: Tuck "N" Roll
Goto Forum:
  

-=] Back to Top [=-
[ Syndicate this forum (XML) ] [ RSS ] [ PDF ]

Current Time: Sat Jul 20 01:32:29 EDT 2024
.:: Contact :: Home ::.

Powered by: FUDforum 3.1.3.
Copyright ©2001-2023 FUDforum Bulletin Board Software