VintageKustom.com: Repairing Kustom Amps » Schematics for K200 PA Head

Home » VintageKustom.com » Repairing Kustom Amps » Schematics for K200 PA Head

Show: Today's Messages :: Polls :: Message Navigator

Schematics for K200 PA Head [message #1414]

Tue, 09 April 2002 10:21

Anonymous

I picked up a 200 PA head off of Ebay for practically nothing. It was sold "as is", and naturally, it wasn't working when I got it. I looked at the fuse first, which was blown. I replaced it, plugged it in, turned it on, and I let the smoke out of one of the transistors. You know that's what makes all electronics work, don't you? It's the smoke. If you let the smoke out, it quits working, every time. Anyway, I need to get my hands on schematics for the unit so I can track down which cap or diode is shot and needs replacement. Any help would be appreciated. Thanks Rod

Report message to a moderator

Re: Schematics for K200 PA Head [message #1469 is a reply to message #1414]

Thu, 25 April 2002 13:42

Anonymous

It is quite likely that you damaged some if not all of the output transistors by letting it smoke. Regarding the schematic, it is sometimes located on the top metal cover of the chassis. Remove the cover and take a look. Good luck.

Report message to a moderator

Previous Topic:	Color repair
Next Topic:	1-15 SC combo help

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Aug 01 01:09:03 EDT 2024